HITACHI ZX50U-2 5 TON DIGGER WITH FULL CAB

Hitachi ZW80 wheel loader

WAS $75,000+GST ($86,250 INCL GST)
NOW $69,500+GST ($79,925 INCL GST)

2014 MODEL
5.3 TON operating weight
Low 1670 hours
Arriving October
Specs here
http://www.cableprice.co.nz/products/hitachi/wheel-loaders/zw80.aspx

YANMAR VIO70-3
$55,000+GST ($63,250 INCL GST)

OPPERATING WEIGHT 7.8 TON
FULL CAB
HYDRAULIC QUICK HITCH
WILL HAVE NEW AUX PIPING
FRESH PAINT AND DECALS
STEEL TRACKS 80-85%
SPROCKETS 80-85%
BLADE
FRESH SERVICE
ROCK BUCKET
04198.3 HOURS
NEW RUBBER BOLT ON TRACK PADS AVAILABLE AS AN EXTRA, PLEASE ENQUIRE FOR A PRICE.

Used wide cleaning bucket $2750+gst
New tilt bucket $4500+gst

With a width of 2270mm these are perfect for fitting in some 6x4 tip truck decks (a lot are 2.3m inside but check your tub)

Size specs here
https://diggercity.co.nz/pages/construction-excavator-broch
ures


Would suit someone looking for any of these machines: Hitachi ZX50, ZX60, EX60, EX75, EX85, ZX70, ZX75 ZX85, Komatsu PC78, PC60, PC70, Yanmar Vio70, VIO75, VIO80, SV100

YANMAR V3-6 WHEEL LOADER
$49,900+GST ( $57,385 INCL GST)

Very low 262 hours
Full cab
All tyres in exc condition
3 ton opperating weight
Factory ROPS cab

We have managed to sauce two more of these with simiular hours , please see other listings.
The v3 is no longer available new in New Zealand .
Due to arrive early October , 10% deposit will hold till arival and inspected.

YANMAR V3-6 FEATURES
2 Mode Control
Fully Automatic Mode- ?The machine will accelerate smoothly and change gear speed automatically
Fixed Speed Mode- ?Machine speed is fixed at low speed mode irrespective of accelerator operation. Powerful, smooth job operation-a convenient mode for jobs in restricted areas.

Auto Leveler or Return to Dig Function
A single lever operation places the bucket level on the ground, automatically. The bucket moves swiftly back to the scooping position after dumping. It makes everyone a skilled operator.

Large Counterweight
A large, sturdy counter-weight guards the rear. Damage to the rear is common in loader work. The rear, including turn signals, is securely protected by a large cast iron counter-weight. It is safe, sturdy and strong.

Rear Axle Oscillation
The driving force of the machine it transmitted securely in uneven terrain through the use of rear axle oscillation. It reduces operator fatigue and helps keep operation level.

Column Shift
A single lever operation for instant switching between forward and reverse. A safety lock prevents mis-operation.

Suspension Seat
Comfortable suspension seat with seatbelt and reclining back.



Flasher
Flasher and side combination work light.

V3-6 Quick Specs
Weight: 6801 lb
Net Power: 30.3 hp
Bucket Capacity: .52 cu yd

YANMAR V3-6 WHEEL LOADER
$49,900+GST ( $57,385 INCL GST)

Very low 221 hours
Full cab
All tyres in exc condition
3 ton opperating weight
Factory ROPS cab

We have managed to sauce two more of these with simiular hours , please see other listings.
The v3 is no longer available new in New Zealand .

YANMAR V3-6 FEATURES
2 Mode Control
Fully Automatic Mode- 
The machine will accelerate smoothly and change gear speed automatically
Fixed Speed Mode- 
Machine speed is fixed at low speed mode irrespective of accelerator operation. Powerful, smooth job operation-a convenient mode for jobs in restricted areas.

Auto Leveler or Return to Dig Function
A single lever operation places the bucket level on the ground, automatically. The bucket moves swiftly back to the scooping position after dumping. It makes everyone a skilled operator.

Large Counterweight
A large, sturdy counter-weight guards the rear. Damage to the rear is common in loader work. The rear, including turn signals, is securely protected by a large cast iron counter-weight. It is safe, sturdy and strong.

Rear Axle Oscillation
The driving force of the machine it transmitted securely in uneven terrain through the use of rear axle oscillation. It reduces operator fatigue and helps keep operation level.

Column Shift
A single lever operation for instant switching between forward and reverse. A safety lock prevents mis-operation.

Suspension Seat
Comfortable suspension seat with seatbelt and reclining back.



Flasher
Flasher and side combination work light.

V3-6 Quick Specs
Weight: 6801 lb
Net Power: 30.3 hp
Bucket Capacity: .52 cu yd

Summer special!

WAS $34,500+ GST ($39,675 INC GST)
NOW $30,000+ GST ($34,500 INC GST)

2 brand new rear tyres, front tyres in good condition
4WD
12573.7 hours
Bucket in good condition
1992 model
Euro quick hitch
Fresh paint and new decals
Full cab
Will have fresh service

Great machine for farm or small quarry.


.

Would suit someone looking for a Hitachi, LX70, LX-80, LX50, Komatsu WA70, WA80, Yanmar V4 

S450

SUMITOMO SH75X-3

$43,000+GST($49,450INCL GST)

Blade
Full cab
Steel tracks with 450mm wide grouser plates
New sprockets
Chains in average condition
Rock bucket in good condition
Nsp tilt bucket 1700mm wide in good condition
JB Hydraulic quick hitch
Zero swing
05153 hours
Tidy over all condition.

S602

WAS $49,990+GST ($57,488 INCL GST)
NOW $43,470+GST ($49,990 INCL GST)

3133.0 Hours
Full cab
New NSB manual quick hitch
Fresh pain and decals
Front blade
Sprockets 85-90%
Tracks 80-85%
New NSB wide bucket
Trenching bucket
Off set boom
Front blade in good condition
Removable rubber track pads


Zero tail swing makes it great in tight areas.

Smooth powerful machine very nice to operate, a very handy size, great for driveways, building, small contracting jobs or farm work.

Full spec brochure here

http://ritchiespecs.com/specification?type=&category=Mini+Excavator&make=Hitachi&model=ZX40U-2&modelid=107551


Would suit someone looking for any of these machines: EX30, EX40, EX25 ZX30 ZX40 ,EX50 ZX50 Komatsu PC30, PC25 PC40 etc

]

HITACHI ZW100 WHEEL LOADER

$98,000+GST ($112,700 INCL GST)

Operating weight 6990 kg
Factory ROPS cab
AC
Only 01800.0 hours
Tyres in good condition
Bucket in good condition , aprox 1.2 cube
Similar size machine to a Hitachi LX70
Will come with fresh service and paint touched up where needed.
Pictured in Japan , 10% deposit will hold till arrival and inspected, due to arrive early Nov

Specs
http://www.cableprice.co.nz/equipment/hitachi/wheel-loaders/zw100.aspx


Would suit someone looking for a Hitachi , LX70, LX-80 LX50 or Komatsu WA70, WA80, ,Yanmar V4.

We offer finance at 9.75% to approved purchasers

HITACHI ZX35U-3F
$34,999+GST ($40,248INCL GST)


Hydraulic quick hitch
Factory ROPS canopy
Blade
Off set boom
3899.0 hours
Freshpaint and decals
Rubber tracks 65%
sprockets 65%
Aux piping
Fresh service
Rock bucket
Tilt bucket

Specs
http://speceps.com/spec/building-6259/hitachi/zx35u-3.html

Would suit someone looking for any of these machines: EX30, EX40, EX25 ZX30 ZX40 ,EX50 ZX50 Komatsu PC30, PC25 PC40 etc

Hitachi ZX85USB-3 2012 8.5 ton

3820 hours
2012
Hydraulic Quick hitch
Piped for aux and second function like the Hydraulic grab post rammer pictured (available for extra with machine purchase or on its own)
Anti Drop Valve
E-Stops

Fresh paint and decals

Fresh service

Chains Brand new 
Sprockets 80-85%

Second hand chains with rubber cleats available for $1500+gst for a spare set , chains in 70-75% as per pic attached.

Size specs here
https://diggercity.co.nz/pages/construction-excavator-broch
ures

Would suit someone looking for any of these machines: EX75, EX85, ZX75 ZX85,Komatsu PC78, etc

 s516

HITACHI LX80-7 WHEEL LOADER

8 ton opperating weight
Near new tyres x 4
Fresh paint and decals
New led work lights
Fresh service
Large bulk bucket in good condition

Great machine for farm or small quarry.
Runs very well , nice to opperate

.

Would suit someone looking for a Hitachi , LX70, LX-80 LX50 or Komatsu WA70, WA80, ,Yanmar V4.
s484

Komatsu PC40 MR-2 4 Ton Excavator

$34,7730+GST ($39,990INCL GST)

Rubber tracks
2215.5 hours
Front blade in good condition
Off set boom
Rops canapy
Anti drop valves
Fresh service , paint and decals
New NSB manual quick hitch

Zero tail swing makes it great in tight areas.

Smooth powerful machine very nice to operate, a very handy size, great for driveways, building, small contracting jobs or farm work.

Full spec brochure here
https://www.ritchiespecs.com/model/komatsu-pc40mr-2-midi-excavator




Would suit someone looking for any of these machines: EX30, EX40, EX25 ZX30 ZX40 ,EX50 ZX50 Komatsu PC30, PC25 PC40 etc

S505