EXCAVATOR ATTACHMENTS

Demolition Grab for 8 Ton Digger ZX75, SV80, PC78 308 Demolition Grab for 8 Ton Digger ZX75, SV80, PC78 308
Demolition Grab for 8 Ton Digger ZX75, SV80, PC78 308

$1500+gst ($1775 inc)

Mechanical Demo Grab for 8 ton machines, pins straight on in place of the standard H-Bar

50mm pins will fit the likes of
Hitachi ZX70 ZX75 ZX80 ZX85
Caterpillar 308E 308D
Yanmar VIO70 VIO75 VIO80 SV80 SV100
Komatsu PC78 PC88

Removed off a machine we imported and replaced with a bucket setup so no longer needed.

$1,543 +GST
EXCAVATOR HYDRAULIC 2 LOCK HITCH ZX120/ZX135
EXCAVATOR HYDRAULIC 2 LOCK HITCH ZX120/ZX135

EXCAVATOR HYDRAULIC 2 LOCK HITCH ZX120/ZX135

Top quality NSB Hydraulic quick hitch for 10-14 tone excavator. 

Built for the European market these hitches are well built. 

Pinned for the standard Hitachi 9.5-14 ton machines. 

Includes piping, buzzer and switch control required for fitting, this is not included in most hitches available in NZ and be quite costing to buy on their own. 

Specs: 
Make NSB 
Model 9.5-14 ton Hitachi 
65mm pin size, 
264mm Arm width 
360mm pin centres 
Hydraulic 

You won’t find a better value for money quick hitch in NZ built to this quality. 

If you want to see one in operation please call to arrange a time to view. 


Would suit any of these machines pinned to the above specs: 

Case CX130, CZ135, CX145 (65mm pins, 355mm centres, 254 arm width) 

Daewoo 140 130 
Doosan DX140 (65mm pins, 409mm centres, 260 arm width) 

Hitachi EX100 EX110 EX120 EX130, EX135 
Hitachi ZX110 ZX120 ZX130 ZX135 ZW140 

Hyundai R110 R130 R140 (65mm pins, 390mm centres, 260 arm width) 

Kobelco SK120 SK125, SK135, SK140, SK130 (65mm pins, 370-376mm centres, 250 arm width) 

Sumitomo SH120, SH125, SH130, SH135, 65mm pins, 355mm centres, 254 arm width) 


Check your machine pin size here 
https://www.guncity.com/diggerhitchsize 


(344024)

$5,217 +GST
EXCAVATOR HYDRAULIC LOG GRAB SUIT  10-14 TON EXCAVATOR HYDRAULIC LOG GRAB SUIT  10-14 TON
EXCAVATOR HYDRAULIC LOG GRAB SUIT 10-14 TON

New NSB digger hydraulic log grab
Adjustable pin center
Suit 10-14 ton digger or similar
Pin size 65mm
Pin center adjustable from 360-420mm
Dipper/ear width 254mm ( spacers bosses could be machined wider)

Would suit any of these machines pinned to the above specs:

Case CX130, CZ135, CX145 (65mm pins, 355mm centres, 254 arm width)

Daewoo 140 130
Doosan DX140 (65mm pins, 409mm centres, 260 arm width)

Hitachi EX100 EX110 EX120 EX130, EX135
Hitachi ZX110 ZX120 ZX130 ZX135 ZW140

Hyundai R110 R130 R140 (65mm pins, 390mm centres, 260 arm width)

Kobelco SK120 SK125, SK135, SK140, SK130 (65mm pins, 370-376mm centres, 250 arm width)

Sumitomo SH120, SH125, SH130, SH135, 65mm pins, 355mm centres, 254 arm width)



For all inquiries contact Dan on 021886379

Viewing at Marshland Road, Christchurch.
344094

$6,086 +GST
EXCAVATOR POST DRIVER & GRAB ZX75
EXCAVATOR POST DRIVER & GRAB ZX75

EXCAVATOR POST DRIVER & GRAB ZX75

$7,825 +GST
Excavator Ripper - 80mm Pins Excavator Ripper - 80mm Pins
Excavator Ripper - 80mm Pins

Excavator Ripper
$3200 +GST ($3680 inc)

Hitch Fitment Size
Pins: 80mm
Pin centres: 395mm
Ear Width: 310mm

Shank Dimensions: Length 1450mm x 80mm wide

If you are unsure what size your excavator pins are please check this chart which is typically a good indication as to what you might have (please note some models may vary slightly depending on the country they were ordered for.

https://diggercity.co.nz/pages/digger-hitch-size

#67

$3,200 +GST
Excavator Ripper Attachment - 70mm Pins Excavator Ripper Attachment - 70mm Pins
Excavator Ripper Attachment - 70mm Pins

Excavator Ripper Attachment
$3200 +GST ($3680 inc)

Hitch Fitment Size
Pins: 70mm
Pin centres: 365mm
Ear Width: 250mm

Shank Dimensions: Length 800mm x 80mm wide

If you are unsure what size your excavator pins are please check this chart which is typically a good indication as to what you might have (please note some models may vary slightly depending on the country they were ordered for.

https://diggercity.co.nz/pages/digger-hitch-size

#65

$3,200 +GST
EXCAVATOR RIPPER ZX120/ZX135 65MM
EXCAVATOR RIPPER ZX120/ZX135 65MM

EXCAVATOR RIPPER ZX120/ZX135 65MM

$1,825 +GST
EXCAVATOR RIPPER ZX30-35 35MM
EXCAVATOR RIPPER ZX30-35 35MM

EXCAVATOR RIPPER ZX30-35 35MM

$1,043 +GST
EXCAVATOR RIPPER ZX330/ZX350 100MM
EXCAVATOR RIPPER ZX330/ZX350 100MM

EXCAVATOR RIPPER ZX330/ZX350 100MM

$4,782 +GST
EXCAVATOR RIPPER ZX75/PC78/VIO70 50MM
EXCAVATOR RIPPER ZX75/PC78/VIO70 50MM

EXCAVATOR RIPPER ZX75/PC78/VIO70 50MM

Hitachi H-Bar for Various Size ZX75 ZX120 & ZX200 Hitachi H-Bar for Various Size ZX75 ZX120 & ZX200
Hitachi H-Bar for Various Size ZX75 ZX120 & ZX200

Hitachi H-Bar for Various Size ZX75 ZX120 & ZX200

These have been removed from used machines we have imported.
Because they have a non NZ certified hook we cannot sell them on machines.
Buyer need to be aware that to fit them to a machine they must remove the hook or have it certified.

Also know as A-Link, Bucket Linkage Assembly.

These parts are very expensive new and quite a commonly needed replacement.

ZX75 ZX70, ZX85 $400+GST

ZX110 ZX120 ZX135 EX120-5 $500+GST

ZX180 ZX200 ZX225 EX200-5 $600+GST

$400 +GST

Scroll To Top