Quick Hitch

EXCAVATOR HYDRAULICK QUICK HITCH KOMATSU 10-14T
EXCAVATOR HYDRAULICK QUICK HITCH KOMATSU 10-14T

Model 10-14 Excavator
60mm Pins
260mm Between Ears
375-400mm pin Centre to Pin Centre (can fit multiple sizes)

 

If you are unsure what size your excavator pins are please check this chart which is typically a good indication as to what you might have (please note some models may vary slightly depending on the country they were ordered for

https://www.guncity.com/diggerhitchsize

 

If you want to see one in operation please call to arrange a time to view.

Would suit any of these machines pinned to the above specs: 
 

Komatsu PC100, PC120, PC128, PC130, PC138
 

(350079)

EXCAVATOR HYDRAULICK QUICK HITCH ZX 30/33/35/38
EXCAVATOR HYDRAULICK QUICK HITCH ZX 30/33/35/38

EXCAVATOR HYD QUICK HITCH ZX 30/33/35/38

EXCAVATOR MANUAL QUICK HITCH ZX120/ZX135
EXCAVATOR MANUAL QUICK HITCH ZX120/ZX135

Hitachi EX/ZX 100/120/135 Manual Quick Hitch

Top quality NSB Hydraulic quick hitch for 10-14 tone excavator.

Built for the European market these hitches are well built.

Pinned for the standard Hitachi 9.5-14 ton machines.

Specs:
Make NSB
Model 9.5-14 ton Hitachi
65mm pin size,
255mm Arm width
360-410mm pin centres

You won’t find a better value for money quick hitch in NZ built to this quality.

If you want to see one in operation please call to arrange a time to view.

(Pic is of mixed models model but style is the same)

Would suit any of these machines pinned to the above specs:

Case CX130, CZ135, CX145 (65mm pins, 355mm centres, 254 arm width)

Daewoo 140 130
Doosan DX140 (65mm pins, 409mm centres, 260 arm width)

Hitachi EX100 EX110 EX120 EX130, EX135
Hitachi ZX110 ZX120 ZX130 ZX135 ZW140

Hyundai R110 R130 R140 (65mm pins, 390mm centres, 260 arm width)

Kobelco SK120 SK125, SK135, SK140, SK130 (65mm pins, 370-376mm centres, 250 arm width)

Sumitomo SH120, SH125, SH130, SH135, 65mm pins, 355mm centres, 254 arm width)


Check your machine pin size here
https://www.guncity.com/diggerhitchsize

(344012)

EXCAVATOR MANUAL QUICK HITCH ZX22U
EXCAVATOR MANUAL QUICK HITCH ZX22U

EXCAVATOR MANUAL QUICK HITCH ZX22U

$1,651 +GST
Hitachi Hydraulic Quick Hitch EX/ZX 200/225/
Hitachi Hydraulic Quick Hitch EX/ZX 200/225/

$4346+GST ($4999inc GST) 

Hitachi EX/ZX 200/225/ Hydraulic Quick Hitch 

Top quality NSB Hydraulic quick hitch for 18-23 ton excavator. 

Built for the European market these hitches are well built. 

Pinned for the standard Hitachi 18-23 ton machines. 

Includes piping, buzzer and switch control required for fitting, this is not included in most hitches available in NZ and be quite costing to buy on their own. 

Specs: 
Make NSB 
Model 9.5-14 ton Hitachi 
80mm pin size, 
305mm Arm width 
440-480mm pin centres (can handle multiple sizes)
Hydraulic 

Check your machine pin size here

https://www.guncity.com/diggerhitchsize


You won’t find a better value for money quick hitch in NZ built to this quality. 

If you want to see one in operation please call to arrange a time to view. 

(Pic is of ZX135 model but style is the same) 

Would suit any of these machines pinned to the above pin specs:

 

Case CX210B, CX225SR (80mm Pins, 451mm Centres, 306mm Arm Width)

 

Cat / Caterpillar 320, 325B 325C, (80mm Pins, 442-445 Centres, 310mm arm width which means hitch needs to be opened out 2.5mm each side on top)

 

Daewoo S180, S210W, S220, S225 (80mm Pins, 455-464mm Centres, 305mm Arm Width)


Doosan DX180, DX225 DX235 (80mm Pins, 464 Centres, 332mm arm width which means hitch needs to be opened out 14mm each side on top)


Hitachi EX200 EX210 EX225 (80mm Pins, 476mm Centres, 305mm Arm Width)


Hitachi ZX180, ZX200, ZX210, ZX225,  (80mm Pins, 476mm Centres, 305mm Arm Width)

 

Hyundai R200, R210 R235 (80mm Pins, 460 Centres, 333mm arm width which means hitch needs to be opened out 13.5mm each side on top)

 

JCB JS220 (80mm Pins, 445 Centres, 305mm Arm Width)

 

Kobelco SK200, SK210, SK225, (80mm Pins, 444 Centres, 325mm arm width which means hitch needs to be opened out 10mm each side on top)

 

Komatsu PC200, PC220, PC228, PC240, PC270 (80mm Pins, 450-460mm Centres, 326mm arm width which means hitch needs to be opened out 10mm each side on top) 

 

Volvo EC210 EC220, ECR235 (80mm Pins, 467mm Centres, 326mm arm width which means hitch needs to be opened out 10mm each side on top) 

 

Sumitomo  SH200, SH210, SH225, (80mm pins. 450-455mm Centres, 306mm arm width)

 

350049

Hitachi Hydraulic Quick Hitch KitEX/ZX 100/120/135 Hitachi Hydraulic Quick Hitch KitEX/ZX 100/120/135 Sale
Hitachi Hydraulic Quick Hitch KitEX/ZX 100/120/135

Hitachi EX/ZX 100/120/135 Hydraulic Quick Hitch

Top quality NSB Hydraulic quick hitch for 10-14 tone excavator.

Built for the European market these hitches are well built.

Pinned for the standard Hitachi 9.5-14 ton machines.

Includes piping, buzzer and switch control required for fitting, this is not included in most hitches available in NZ and be quite costing to buy on their own.

Specs:
Make NSB
Model 9.5-14 ton Hitachi
65mm pin size,
255mm Arm width
360-410mm pin centres
Hydraulic

You won’t find a better value for money quick hitch in NZ built to this quality.

If you want to see one in operation please call to arrange a time to view.

(Pic is of ZX135 model but style is the same)

Would suit any of these machines pinned to the above specs:

Case CX130, CZ135, CX145 (65mm pins, 355mm centres, 254 arm width)

Daewoo 140 130
Doosan DX140 (65mm pins, 409mm centres, 260 arm width)

Hitachi EX100 EX110 EX120 EX130, EX135
Hitachi ZX110 ZX120 ZX130 ZX135 ZW140

Hyundai R110 R130 R140 (65mm pins, 390mm centres, 260 arm width)

Kobelco SK120 SK125, SK135, SK140, SK130 (65mm pins, 370-376mm centres, 250 arm width)

Sumitomo SH120, SH125, SH130, SH135, 65mm pins, 355mm centres, 254 arm width)


Check your machine pin size here
https://diggercity.co.nz/pages/digger-hitch-size


(350050)

$3,912 $3,477 +GST
Hitachi Quick Hitch Kit EX/ZX 30/35/40 Hitachi Quick Hitch Kit EX/ZX 30/35/40
Hitachi Quick Hitch Kit EX/ZX 30/35/40

Hitachi EX/ZX 30/35/38/40 Manual Quick Hitch

Top quality NSB quick hitch for 3-4 tone excavator.

Built for the European market these hitches are well built.

Pinned for the standard Hitachi 3-4 ton machines.

Specs:
Make NSB
Model 3-4 ton Hitachi
40mm pin size,
140mm Arm width
185mm pin centres
Hydraulic

You won’t find a better value for money quick hitch in NZ built to this quality.

If you want to see one in operation please call to arrange a time to view.

(Pic is of ZX135 model but style is the same)

Would suit any of these machines pinned to the above specs: EX30, EX40, EX25 ZX30 ZX40, Komatsu PC30, PC35 PC40
(344023 )

$1,303 +GST
Hydraulic Quick Hitch Kit for 4-5.5 Ton Diggers Hydraulic Quick Hitch Kit for 4-5.5 Ton Diggers
Hydraulic Quick Hitch Kit for 4-5.5 Ton Diggers

We can ship nationwide.


Hydraulic Quick Hitch Kit for 4-5.5 Ton Diggers


Built for the European market these hitches are well built.


Pinned for most standard 4-5.5 ton machines.


Includes piping, buzzer and switch control required for fitting, this is not included in most hitches available in NZ and be quite costing to buy on their own.


Specs:

Make NSB

Model 3.5-5.5 ton Excavator

45mm pins

170mm between Ears

230mm Pin Centre to Centre

Hydraulic

“If you are unsure what size your excavator pins are please check this chart which is typically a good indication as to what you might have (please note some models may vary slightly depending on the country they were ordered for”

https://diggercity.co.nz/pages/digger-hitch-size


You won’t find a better value for money quick hitch in NZ built to this quality.


If you want to see one in operation please call to arrange a time to view.


Would suit any of these machines pinned to the above specs:

Hyundai R55

Komatsu PC40, PC45, PC50

Kobelco 45SR SK45, 50SR

Volvo EC55

Yanmar Vio45, Vio50, Vio55



Welcome to Digger City, we are machinery dealers located in Christchurch and have been selling new and used machinery since 2010. We pride ourselves on our service and our huge range of stock ready for immediate delivery nationwide.


Check out our listings to see our current stock of Excavators, Loaders, Bulldozers, Graders and earthmoving accessories.


Digger City also stocks popular machinery attachments; our experienced team can configure your new machine quickly at our onsite workshop.


Up to 100% finance can be arranged at competitive rates, call Joe on 0800 284 868, subject to normal lending criteria.


To visit the yard at 510 Cranford Street, Redwood, Christchurch or discuss your new machine, give Dan a call on 021 886 379


(350080)

$2,434 +GST
Hydraulic Quick Hitch Kit for 6-9 Ton Diggers Hydraulic Quick Hitch Kit for 6-9 Ton Diggers
Hydraulic Quick Hitch Kit for 6-9 Ton Diggers

Hydraulic Quick Hitch Kit for 6-9 Ton Diggers

Built for the European market these hitches are well built.

Pictures are for an example , hitch listed is the same only to suit the machines listed!

Pinned for most standard 6-9 ton machines.

Includes piping, buzzer and switch control required for fitting, this is not included in most hitches available in NZ and be quite costing to buy on their own.

Specs
Make NSB
Model 6-9 ton Excavator
50mm Pins
200mm Between Ears
300-315mm pin Centre to Pin Centre (can fit multiple sizes)

Hydraulic
If you are unsure what size your excavator pins are please check this chart which is typically a good indication as to what you might have (please note some models may vary slightly depending on the country they were ordered for

https://diggercity.co.nz/pages/digger-hitch-size

You won’t find a better value for money quick hitch in NZ built to this quality.

If you want to see one in operation please call to arrange a time to view.

Would suit any of these machines pinned to the above specs:

Case CX75, CX80 (50 mm Pins, 300mm Centres 190mm Arm Width, which means you will need 5mm shims on arm side and 5mm machined off bucket side of hitch)

Cat / Caterpillar 308D & 308E (Not 308B or 308C) (50 mm Pins, 200mm Arm Width, 305mm Centres)

Hitachi EX75, ZX70, ZX75, ZX75US, ZX80, ZX85
(50 mm Pins, 200mm Arm Width, 310mm Centres)


Komatsu PC60, PC75, PC78, PC88, PC80, PC90, PW60
(50 mm Pins, 200mm Arm Width, 312mm Centres)

Sumitomo SH60, SH75, SH80
(50 mm Pins, 300mm Centres 190mm Arm Width, which means you will need 5mm shims on arm side and 5mm machined off bucket side of hitch)


Yanmar Vio70, Vio75, Vio80, SV100 (50 mm Pins, 200mm Arm Width, 312mm Centres)

(350078)

$2,608 +GST
NSB EXCAVATOR MANUAL QUICK HITCH ZX75/PC78/VIO70
NSB EXCAVATOR MANUAL QUICK HITCH ZX75/PC78/VIO70

Manual Quick Hitch Kit for 6-9 Ton Diggers 

Built for the European market these hitches are well built. 

Pictures are for an example , hitch listed is the same only to suit the machines listed! 

Pinned for most standard 6-9 ton machines. 

Specs 
Make NSB 
Model 6-9 ton Excavator 
50mm Pins 
200mm Between Ears 
300-315mm pin Centre to Pin Centre (can fit multiple sizes) 

If you are unsure what size your excavator pins are please check this chart which is typically a good indication as to what you might have (please note some models may vary slightly depending on the country they were ordered for 

https://www.guncity.com/diggerhitchsize 

You won’t find a better value for money quick hitch in NZ built to this quality. 

If you want to see one in operation please call to arrange a time to view. 

Would suit any of these machines pinned to the above specs: 

Case CX75, CX80 (50 mm Pins, 300mm Centres 190mm Arm Width, which means you will need 5mm shims on arm side and 5mm machined off bucket side of hitch) 

Cat / Caterpillar 308D & 308E (Not 308B or 308C) (50 mm Pins, 200mm Arm Width, 305mm Centres) 

Hitachi EX75, ZX70, ZX75, ZX75US, ZX80, ZX85 
(50 mm Pins, 200mm Arm Width, 310mm Centres) 


Komatsu PC60, PC75, PC78, PC88, PC80, PC90, PW60 
(50 mm Pins, 200mm Arm Width, 312mm Centres) 

Sumitomo SH60, SH75, SH80 
(50 mm Pins, 300mm Centres 190mm Arm Width, which means you will need 5mm shims on arm side and 5mm machined off bucket side of hitch) 


Yanmar Vio70, Vio75, Vio80, SV100 (50 mm Pins, 200mm Arm Width, 312mm Centres) 
 

(344006)
 

$2,086 +GST

Scroll To Top