HITACHI ZX60USB-3F 6 TON EXCAVATOR

Hitachi ZW80 wheel loader

WAS $75,000+GST ($86,250 INCL GST)
NOW $69,500+GST ($79,925 INCL GST)

2014 MODEL
5.3 TON operating weight
Low 1670 hours
Arriving October
Specs here
http://www.cableprice.co.nz/products/hitachi/wheel-loaders/zw80.aspx

Special!

$88,500+GST (101,775 INCL GST)

Caterpillar 312D
2012 model
Low 3114.5 hours
Anti drop valves
Steel tracks 85% with removable rubber pads
Sprockets 85%
Rock bucket in good condition
A/C
Rresh service
Will come with new NSB hydraulic quick hitch
Can fit new aux piping for tilt bucket ect at additional cost
Very clean and tidy unit.

Would suit someone looking for any of these machines: EX135, EX140, EX125 ZX135 ZX140 ,EX150 ZX150 Komatsu PC128, PC120 PC140 etc

MERCEDES BENZ, ACTROS/3246L
$49,000+GST ($56,350NCL GST)

2007 MODEL
8 WHEEL TIP TIPPER
LUSK ENG ALLOY BIN IN GOOD CONDITION
12TON PAY LOAD
REAR GRAIN SHOOT, SPREADING CHAINS
BIN COVER
RECENT COF
862708.7 KM DASH
165214.2 HUBO
BIN LENGTH =6700MM
BIN WIDTH =2480MM
BIN SIDE HEIGHT=1500MM
HIGHT FROM GROUND TO TOP OF BIN =2750MM
RING FEEDER 50MM

DETAILS

Submodel: 3246L/48
Body Style: Other Truck
VIN: WDB9302442L115519
Plate: EDJ967
Engine No: 54194800449308
Chassis: WDB9302442L115519
Vehicle Type: Goods Van/Truck/Utility
Seats: 2
CC rating: 12,000cc
Fuel Type: Diesel
Power: 335kW
Transmission: 16-GEAR MANUAL
Assembly Type: Imported Built-Up
Country of Origin: Germany
Gross Vehicle Mass: 32,000kg
Tare Weight: 10,560kg
Maximum Rated Towed Mass:
500kg unbraked trailer
29,000kg braked trailer
Axle Type: 4-Axle Twin Steer + Tandem
Axles: 4
Wheelbase: 3,450
Front Axle Group Rating: 12,600
Rear Axle Group Rating: 19,000

P598

YANMAR VIO17
$26,500+GST ($30,475 INCL GST)

1.7 TON OPPERATING WEIGHT
EXPANDING TRACKS
FRESH PAINT AND DECALS
RUBBER TRACKS IN GOOD CONDITION
FRESH SERVICE
WIDE CLEANING BUCKET AND DIGGING BUCKET
1/2 HITCH
AUX PIPING FOR ATTACHMENTS
2610.8 HOURS

PERFECT SIZE TO BE TRAILERED
SPECS BELOW
https://www.yanmar.com/global/construction/products/excavator/vio17/spec.html

S628

HITACHI ZX20U DIGGER

$31,000+GST ($35,650 INCL GST)

2 TON
2014 MODEL
1484.0 HOURS
STEEL TRACKS WITH REMOVABLE RUBBER PADS
AUX PIPING
WILL COME WITH NEW QUICK HITCH
BLADE
OFF SET BOOM

FRESH SERVICE
NEW PAINT AND DECALS
ROCK BUCKET
NEW CLEANING BUCKET AVAILABLE AS AN EXTRA
Perfect size machine to be trailered.

Would suit someone looking for any of these machines: EX30, EX20, EX25 ZX30 ZX40 ,EX50 ZX50 Komatsu PC30, PC25 PC20 etc

]

Mitsubishi Fuso FS416
1991 model
Current COF and RUC
5 SPEED Manual
Electric windows
620746.5 km on dash
083023.7 km on hubo

Beaver tail deck measurements
Width 2490mm
Lenght 7500mm
Height from ground 1070mm
Manual lifting light ramps



VIN: 7A8CJ1D0800530654
Plate: ZM5818
Engine No: 8DC10-1AZ6270
Chassis: FS416U-530654
Vehicle Type: Goods Van/Truck/Utility
Seats: 2
CC rating: 16,750cc
Fuel Type: Diesel
Assembly Type: Imported Built-Up
Country of Origin: Japan
Gross Vehicle Mass: 21,530kg
Tare Weight: 9,060kg
Axles: 4
Wheelbase: 6,610
Front Axle Group Rating: 8,600
Rear Axle Group Rating: 13,500



For all inquiries contact Dan on 021886379

Viewing at Marshland Road, Christchurch.

ISUZU CXH 400 GIGAMAX 8 WHEELER
$40,000+GST ($46,000INCL GST )

2003 MODEL
HYDRAULIC REAR RAMPS
DECK MEASUREMENTS W=2490MM, H=1250MM, L=7200MM
CURRENT COF
ALLOY DECK
012254.9 KM HUBO +1M

016703 KM DASH +1M

CC rating: 14,256cc
Fuel Type: Diesel
Power: 297kW
Transmission: 18-GEAR MANUAL
Assembly Type: Imported Built-Up
Country of Origin: Japan
Gross Vehicle Mass: 29,000kg
Tare Weight: 10,060kg
Maximum Rated Towed Mass:
29,000kg braked trailer
Axle Type: 4-Axle Twin Steer + Tandem
Axles: 4
Wheelbase: 5,980
Front Axle Group Rating: 6,400
Rear Axle Group Rating: 21,000

HITACHI ZX20U DIGGER

$29,990+GST ($34,488 INCL GST)

2 TON
2013MODEL
01902 HOURS
STEEL TRACKS THAT CAN HAVE NEW BOLT ON RUBBER PADS FITTED AT EXTRA COST
FACTORY AUX PIPING
NEW MANUAL QUICK HITCH
BLADE
OFF SET BOOM
FRESH SERVICE
NEW PAINT AND DECALS
ROCK BUCKET
NEW CLEANING BUCKET AVAILABLE AS AN EXTRA

Perfect size machine to be trailered.

S572
Would suit someone looking for any of these machines: EX30, EX20, EX25 ZX30 ZX40 ,EX50 ZX50 Komatsu PC30, PC25 PC20 etc

We offer finance at 9.75% to approved purchasers]

HITACHI ZW80 WHEEL LOADER

$86,900+GST($99,935INCL GST)

2012 MODEL
LOW 0355 HOURS
FACTORY ROPS CAB
FULL CAB
45.6KW
5,270 KG OPPERATING WEIGHT
BUCKET CAPACITY 0.7-1.0M3 HEAPED


SPECS
http://www.cableprice.co.nz/equipment/hitachi/wheel-loaders/zw80.aspx
pictured in Japan , due to arrive mid Fubuary, 10%deposit will hold untill arrival and inspected.

Yanmar Vio 40-5B , 4 ton digger

2012 model
Low 1380 hours
Full cab
Steel tracks with removable rubber pads
Will come with new quick hitch
Rock bucket
Front blade
Will have fresh service
Due to arrive late Oct, 10 % will hold untill arrival and inspection.

Wide Bucket available at $2000+GST
Tilt bucket options available with machine purchase only from $3,000+gst

1970mm wide
2620mm High
See the brochure here (for size and reach specs)
https://diggercity.co.nz/pages/construction-excavator-broch
ures
Would suit any one looking for zx30,zx40,zx50, pc30,pc40,pc50,vio30,vio40,vio50 ect

We offer finance at 9.75% to approved purchasers

Hitachi ZX60USB-3 CLR
REDUCED !!

Was $75,000+GST ($86,250 INCL GST )
Now $68,500+gst ($78,775 incl gst)

2011 Model
6 Ton
Only 1967.5 Hours
Aux piping
Front blade in very good condition
Fresh service
Anti burst valves
New rubber tracks less than 150 hours use
Hydraulic quick hitch
Comes with rock bucket and twin ram tilt bucket
E- stops
Fresh paint and decals

Very tidy machine , suit new buyer, very well speced.

See full specs here
https://diggercity.co.nz/pages/construction-excavator-broch
ures

Would suit someone looking for any of these machines: Hitachi EX60, EX75, EX85, ZX50 ZX55, ZX48, ZX58, ZX70, ZX75 ZX85, Komatsu PC78, PC88, PC60, PC75, PC70 etc

YANMAR VIO70-3
$55,000+GST ($63,250 INCL GST)

OPPERATING WEIGHT 7.8 TON
FULL CAB
HYDRAULIC QUICK HITCH
WILL HAVE NEW AUX PIPING
FRESH PAINT AND DECALS
STEEL TRACKS 80-85%
SPROCKETS 80-85%
BLADE
FRESH SERVICE
ROCK BUCKET
04198.3 HOURS
NEW RUBBER BOLT ON TRACK PADS AVAILABLE AS AN EXTRA, PLEASE ENQUIRE FOR A PRICE.

Used wide cleaning bucket $2750+gst
New tilt bucket $4500+gst

With a width of 2270mm these are perfect for fitting in some 6x4 tip truck decks (a lot are 2.3m inside but check your tub)

Size specs here
https://diggercity.co.nz/pages/construction-excavator-broch
ures


Would suit someone looking for any of these machines: Hitachi ZX50, ZX60, EX60, EX75, EX85, ZX70, ZX75 ZX85, Komatsu PC78, PC60, PC70, Yanmar Vio70, VIO75, VIO80, SV100