VOLVO A30D 23 TON , 6 WHEEL AT DUMP TRUCK

M.T.E 5 AXEL FLAT TOP LOW LOADER PULL TRANSPORTER

$100,000+GST ($115,000 INCL GST)

TIDY UNIT , WILL HAVE NEW COF AND CURRENT REGO AND RUC , SURPLUS TO REQUIREMENTS.

HYDRAULIC RAMPS
- DECK WIDTH 2500 MM
-DECK LENGTH OVER ALL 9700 MM
-BOTTOM DECK LENGTH 6800 MM
-TOP DECK LENGTH 2900 MM
- DECK HIGHT BOTTOM 800 MM
- DECK HEIGHT TOP 1000 MM
- 50 MM TOW EYE

Year: 2004
Gross Vehicle Mass: 29,000kg
Tare Weight: 7,100kg
Axles: 5
Wheelbase: 6,365
Front Axle Group Rating: 20,000
Rear Axle Group Rating: 30,000

Inspection welcome please call to make arrangements.

DYNAPAC CA602D ,SMOOTH DRUM ROLLER
$80,000+GST ($92000 INCL GST)

18,300 KG OPPERATING WEIGHT
2003 MODEL
01359.3 HOURS
TIDY WELL SERVICE UNIT
DRUM WIDTH 2130MM
FRATORY ROPS CAB

SPECS LINK BELOW
https://dynapac.com/en/products/compaction/ca602d

S597

VOLVO A30D DUMP TRUCK
$145,000+gst ($166,750 incl gst)

2004 MODEL
23060 KG OPPERATING WEIGHT
076648.0 KM
250KW ENGINE
6X6

11,700 HOURS - MAY INCREASE AS STILL IN USE.
BODY VOLUME HEAPED 17.5 M3
TIDY UNIT , NOW SURPLUS TO REQUIREMENT.

SPECS
https://www.volvoce.com/-/media/volvoce/global/global-site/product-archive/documents/09-articulated-haulers/05-volvo/v-a30d-d10/v-a30d-d10-2216694153-2003-01.pdf?v=SPg5Pw

DYNAPAC CC142 TWIN DRUM ROLLER

$22,000+GST ($25,300 INCL GST)

3900KG OPPERATING WEIGHT
33.9 KW MOTOR
FRESH PAINT

01414.8 HRS 

FRESH SERVICE
RUNS AND OPPERATES GOOD
1.3M WIDE ROLLERS
SPEC
https://www.lectura-specs.com/en/model/construction-machinery/tandem-vibration-rollers-dynapac/cc-142-20519

S546

KOMATSU D31PX-22 DOZER
$95,000+GST($109,250 INCL GST)

2008 MODEL
3805 HOURS
4 POST ROPS CANOPY
SWAMPER TRACKS
6 WAY BLADE
WILL COME WITH FRESH PAINT AND DECALS
WILL HAVE FRESH SERVICE
PICTURED IN JAPAN , DUE TO ARRIVE FEBUARY, 10% DEPOSIT WILL HOLD UNTILL ARRIVAL AND INSPECTED.

SPECS BELOW
https://home.komatsu/en/worldwide/PDF/D31_37_EX_PX-22_CEN00
334-01.pdf

HITACHI ZW100 7 TON WHEEL LOADER
$122,000+GST($140,300INCL GST)

2013 Model
VERY LOW 274 hours
Tyres in good condition
Bucket in good condition , aprox 1.2 cube
Similar size machine to a Hitachi LX70
Will come with fresh service and paint touched up where needed.
Pictured in Japan , 10% deposit will hold till arrival and inspected, due to arrive April
Specs
http://www.cableprice.co.nz/equipment/hitachi/wheel-loaders
/zw100.aspx


Would suit someone looking for a Hitachi , LX70, LX-80 LX50 or Komatsu WA70, WA80, ,Yanmar V4.

KOMATSU D31PX-22
$130,000+GST ($149,500 INCL GST)

2013 MODEL
FACTORY ROPS CAB
6 WAY BLADE
CURRENTLY RUNNING SWAMPER TRACKS
LOW 2317 HOURS
WILL COME WITH PAINT TOUCHED UP WHERE NEEDED
FULL SERVICE
THIS UNIT IS NOW HERE IN THE YARD AND ABOUT TO GO THROUGH THE SYSTEM.

SPECS BELOW
https://home.komatsu/en/worldwide/PDF/D31_37_EX_PX-22_CEN00334-01.pdf

VOLVO G720B MOTOR GRADER

$120,000+GST ($138,000+GST)
2003 MODEL
12398 HOURS
8300cc
GROENEVELD TWN AUTO GREASING SYSTEM
4250MM WIDE BLADE
FRESH SERVICE
TYRES IN GOOD CONDITION
REAR RIPPERS
OPPERATING WEIGHT 15,400 KG
MACHINE IN GOOD TIDY CONDITION

SPECS
https://www.volvoce.com/global/en/product-archive/motor-graders/volvo/g720b/

HYDRAULIC 7T-8TON AUGER AND PICK COMBO ON CUSTOME MADE SUPPORT FRAME

$12,000+GST (13,800 INCL GST) PRICE REDUCED !

EARTH DRILL 8000 MAX DRIVE HEAD FROM AUGER TORQUE
1X 1500MM AUGER EXTENTION
1X 1500 X 170MM AUGER DRILL
1X 1500 X 350MM AUGER DRILL
1X 1500MM X 700MM AUGER DRILL
1X RIPPER ATTACHMENT
ALL MOUNTED IN A CUSTOME BUILT SUPPORT FRAME WITH LIFTING EYES OR CAN BE LIFED WITH FORK LIFT.
Will suit most machines with
50mm pins
200mm dipper width
310mm pin centres.

EX75, EX85, ZX75 ZX85,Komatsu PC78, etc