Hydraulic Quick Hitch Kit for 4-5.5 Ton Diggers

Fuel Tank Cap 4361638 W/2 keys H800 for Hitachi

For Hitachi Excavator EX120-5 EX100-3 EX150LC-5 EX160LC-5 EX200-3 EX200LC-3 EX200H-3 EX220-5 EX220LC-5 EX230H-5


​​​Application:
270C LC JD CHR70 CP220-3 CS125-3 EG110R EG40R EG40R-C EG65R-3 EG70R EG70R-3 EX100-3 EX100-5 EX100-5 JPN EX100M-3 EX100M-5 EX100WD-3 EX100WD-3C EX120-3 EX120-3C EX120-5 EX120-5 JPN EX120-5HG EX120-5LV JPN EX120-5X EX120-5Z EX1200-5 EX1200-5C EX1200-5D EX1200-6 EX120SS-5 EX125WD-5 EX130H-5 EX130H-5 JPN EX130K-5 EX135UR EX135UR-5 EX135US-5 EX135USR EX135USRK EX140US-5 EX150LC-5 EX200-3 EX200-3C EX200-5 EX200-5 JPN EX200-5HG EX200-5HHE EX200-5LV JAP EX200-5X JPN EX200-5Z JPN EX200LC-5HHE EX200SS-5 EX210H-5 EX210H-5 JPN EX210K-5 JPN EX210LC-5HHE EX220-3 EX220-5 EX220-5 JPN EX220-5HHE EX225USR(LC) EX225USRK(LC) EX230-5 EX230H-5 JPN EX230K-5 EX230LC-5HHE EX270-5 EX280H-5 EX300-3 EX300-3C EX300-5 EX300-5HHE EX300LC-5M EX300LCLL-5 EX300LCLL-5M EX310H-3C EX345USR(LC) EX350H-5 EX350H-5HHE EX350K-5 EX370-5M EX370HD-5 EX370LL-5M EX385USR EX400-3 EX400-3C EX400-5 EX450H-5 EX550 EX550-5 JPN EX60-5(LC) EX600H-3 JPN EX600H-5 JPN EX60BUN-5 EX60LCT-3 EX60WD-2 EX700 EX70LCK-5 EX750-5 EX75UR EX75UR-3 EX75UR-5 EX75URLC-3 EX75URT-5 EX75US-5 EX800H-5 EX80U EX90L-5 FV30 HC1110 HR1200S-5 HR1200SG HR1200SGM HR240G HR320G-5 HR420G-5 HR750SM HR900S-5 HR900SM IZX200 IZX200LC IZX210F IZX210MF MA145-5 MA200 MA200-G MH5510B PZX450-HCME RX2300 SR-G2000 SR-P1200 SR-P600 SR2000G TL1100-3 UCX300 VR512 VR512-2 VR516FS ZH200-A ZH200LC-A ZR130HC ZR260HC ZR420JC ZR600TS ZR800TS ZR900TS ZR950JC ZX110 ZX110-3 ZX110-3-AMS ZX110-3-HCME ZX110-E ZX110M ZX110M-3 ZX110M-3-HCME ZX120 ZX120-3 ZX120-E ZX120-HCMC ZX125US ZX125US-E ZX125W ZX130-3 ZX130-AMS ZX130-HCME ZX130H ZX130K ZX130K-3 ZX130LCN-3F-AMS ZX130LCN-3FHCME ZX130W ZX130W-AMS ZX135UR ZX135US ZX135US-3 ZX135US-3-HCME ZX135US-3F-AMS ZX135US-3F-HCME ZX135US-E ZX135US-HCME ZX135USK ZX135USK-3 ZX135UST ZX140W-3 ZX140W-3-AMS ZX140W-3DARUMA ZX145W-3 ZX145W-3-AMS ZX160 ZX160LC-3 ZX160LC-3-AMS ZX160LC-3-HCME ZX160LCT ZX160W ZX160W-AMS ZX170W-3 ZX170W-3-AMS ZX170W-3DARUMA ZX1800K-3

(344083)

EXCAVATOR HYDRAULIC LOG GRAB

$1,949 off sale! (WAS $9,999 INCL GST)

New NSB digger hydraulic log grab
Adjustable pin center
Suit 18-23 ton digger or similar
Pin size 85 mm
Pin center adjustable from 400-500 mm
Dipper/ear width 310mm ( spacers bosses could be machined wider)

Would suit any of these machines pinned to the above pin specs

Case CX210B, CX225SR (80mm Pins, 451mm Centres, 306mm Arm Width)

Cat / Caterpillar 320, 325B 325C, (80mm Pins, 442-445 Centres, 310mm arm width which means hitch needs to be opened out 2.5mm each side on top)

Daewoo S180, S210W, S220, S225 (80mm Pins, 455-464mm Centres, 305mm Arm Width)

Doosan DX180, DX225 DX235 (80mm Pins, 464 Centres, 332mm arm width which means hitch needs to be opened out 14mm each side on top)

Hitachi EX200 EX210 EX225 (80mm Pins, 476mm Centres, 305mm Arm Width)

Hitachi ZX180, ZX200, ZX210, ZX225, (80mm Pins, 476mm Centres, 305mm Arm Width)

Hyundai R200, R210 R235 (80mm Pins, 460 Centres, 333mm arm width which means hitch needs to be opened out 13.5mm each side on top)

JCB JS220 (80mm Pins, 445 Centres, 305mm Arm Width)

Kobelco SK200, SK210, SK225, (80mm Pins, 444 Centres, 325mm arm width which means hitch needs to be opened out 10mm each side on top)

Komatsu PC200, PC220, PC228, PC240, PC270 (80mm Pins, 450-460mm Centres, 326mm arm width which means hitch needs to be opened out 10mm each side on top)

Volvo EC210 EC220, ECR235 (80mm Pins, 467mm Centres, 326mm arm width which means hitch needs to be opened out 10mm each side on top)

Sumitomo SH200, SH210, SH225, (80mm pins 450-455mm Centres, 306mm arm width)


Welcome to Digger City, we are machinery dealers located in Christchurch and have been selling new and used machinery since 2010. We pride ourselves on our service and our huge range of stock ready for immediate delivery nationwide.

Check out our listings to see our current stock of Excavators, Loaders, Bulldozers, Graders and earthmoving accessories.

Digger City also stocks popular machinery attachments; our experienced team can configure your new machine quickly at our onsite workshop.

Up to 100% finance can be arranged at competitive rates, call Joe on 0800 284 868, subject to normal lending criteria. 

To visit the yard at 510 Cranford Street, Redwood, Christchurch or discuss your new machine, give Dan a call on 021 886 379

(344095)

We can ship nationwide.

Hydraulic Quick Hitch Kit for 4-5.5 Ton Diggers

Built for the European market these hitches are well built.

Pinned for most standard 4-5.5 ton machines.

Includes piping, buzzer and switch control required for fitting, this is not included in most hitches available in NZ and be quite costing to buy on their own.

Specs:
Make NSB
Model 3.5-5.5 ton Excavator
45mm pins
170mm between Ears
230mm Pin Centre to Centre
Hydraulic
“If you are unsure what size your excavator pins are please check this chart which is typically a good indication as to what you might have (please note some models may vary slightly depending on the country they were ordered for”
https://diggercity.co.nz/pages/digger-hitch-size

You won’t find a better value for money quick hitch in NZ built to this quality.

If you want to see one in operation please call to arrange a time to view.

Would suit any of these machines pinned to the above specs:
Hyundai R55
Komatsu PC40, PC45, PC50
Kobelco 45SR SK45, 50SR
Volvo EC55
Yanmar Vio45, Vio50, Vio55


Welcome to Digger City, we are machinery dealers located in Christchurch and have been selling new and used machinery since 2010. We pride ourselves on our service and our huge range of stock ready for immediate delivery nationwide.

Check out our listings to see our current stock of Excavators, Loaders, Bulldozers, Graders and earthmoving accessories.

Digger City also stocks popular machinery attachments; our experienced team can configure your new machine quickly at our onsite workshop.

Up to 100% finance can be arranged at competitive rates, call Joe on 0800 284 868, subject to normal lending criteria.

To visit the yard at 510 Cranford Street, Redwood, Christchurch or discuss your new machine, give Dan a call on 021 886 379

(350080)

Bring the daylight with you with a compact, mount-anywhere lighting solution from Night Saber.

This powerful LED spotlight is perfect for use on ATV's, tractors, trucks, 4WDs, heavy equipment and more. It's high IP68 dust and waterproof rating means it can handle tough conditions day in and day out.

Specifications:
• Output: 24W
• Bulbs: 8 x 3W LED
• Size: 110 x 135 x 51mm
• Voltage: 9-32V DC
• Beam type: Spot/Flood
• IP rating: IP68
• Warrant: 2 years

(177002)

Excavator Treching Bucket
$3500 +GST ($4025 inc)

Hitch Fitment Size
Pins: 100mm
Pin centres: 580mm
Ear Width: 425mm

Bucket width: 600mm

If you are unsure what size your excavator pins are please check this chart which is typically a good indication as to what you might have (please note some models may vary slightly depending on the country they were ordered for.

https://diggercity.co.nz/pages/digger-hitch-size

#81

Excavator Ripper Attachment
$3200 +GST ($3680 inc)

Hitch Fitment Size
Pins: 70mm
Pin centres: 365mm
Ear Width: 250mm

Shank Dimensions: Length 800mm x 80mm wide

If you are unsure what size your excavator pins are please check this chart which is typically a good indication as to what you might have (please note some models may vary slightly depending on the country they were ordered for.

https://diggercity.co.nz/pages/digger-hitch-size


Welcome to Digger City, we are machinery dealers located in Christchurch and have been selling new and used machinery since 2010. We pride ourselves on our service and our huge range of stock ready for immediate delivery nationwide.

Check out our listings to see our current stock of Excavators, Loaders, Bulldozers, Graders and earthmoving accessories.

Digger City also stocks popular machinery attachments; our experienced team can configure your new machine quickly at our onsite workshop.

Up to 100% finance can be arranged at competitive rates, call Joe on 0800 284 868, subject to normal lending criteria.

To visit the yard at 510 Cranford Street, Redwood, Christchurch or discuss your new machine, give Dan a call on 021 886 379

#65

Excavator Rock Bucket
$3800 +GST ($4370 inc)

Hitch Fitment Size
Pins: 65mm
Pin centres: 370mm
Ear Width: 260mm

Bucket width: 890mm

If you are unsure what size your excavator pins are please check this chart which is typically a good indication as to what you might have (please note some models may vary slightly depending on the country they were ordered for.

https://diggercity.co.nz/pages/digger-hitch-size

#59

Excavator Rock Bucket
$3200 +GST ($3680 inc)

Hitch Fitment Size
Pins: 65mm
Pin centres: 370mm
Ear Width: 250mm

Bucket width: 865mm

If you are unsure what size your excavator pins are please check this chart which is typically a good indication as to what you might have (please note some models may vary slightly depending on the country they were ordered for.

https://diggercity.co.nz/pages/digger-hitch-size

Welcome to Digger City, we are machinery dealers located in Christchurch and have been selling new and used machinery since 2010. We pride ourselves on our service and our huge range of stock ready for immediate delivery nationwide.

Check out our listings to see our current stock of Excavators, Loaders, Bulldozers, Graders and earthmoving accessories.

Digger City also stocks popular machinery attachments; our experienced team can configure your new machine quickly at our onsite workshop.

Up to 100% finance can be arranged at competitive rates, call Joe on 0800 284 868, subject to normal lending criteria. 

To visit the yard at 510 Cranford Street, Redwood, Christchurch or discuss your new machine, give Dan a call on 021 886 379

#52

Excavator Rock Bucket
$10000 +GST ($11500 inc)

Hitch Fitment Size
Pins: 100mm
Pin centres: 580mm
Ear Width: 420mm

Bucket width: 1270mm

If you are unsure what size your excavator pins are please check this chart which is typically a good indication as to what you might have (please note some models may vary slightly depending on the country they were ordered for.

https://diggercity.co.nz/pages/digger-hitch-size

#84

Excavator Tilt Bucket
$9200 +GST ($10580 inc)

Hitch Fitment Size
Pins: 90mm
Pin centres: 500mm
Ear Width: 330mm

Bucket width: 2000mm

If you are unsure what size your excavator pins are please check this chart which is typically a good indication as to what you might have (please note some models may vary slightly depending on the country they were ordered for.

https://diggercity.co.nz/pages/digger-hitch-size

Welcome to Digger City, we are machinery dealers located in Christchurch and have been selling new and used machinery since 2010. We pride ourselves on our service and our huge range of stock ready for immediate delivery nationwide.

Check out our listings to see our current stock of Excavators, Loaders, Bulldozers, Graders and earthmoving accessories.

Digger City also stocks popular machinery attachments; our experienced team can configure your new machine quickly at our onsite workshop.

Up to 100% finance can be arranged at competitive rates, call Joe on 0800 284 868, subject to normal lending criteria. 

To visit the yard at 510 Cranford Street, Redwood, Christchurch or discuss your new machine, give Dan a call on 021 886 379

#88

Excavator Skeleton Bucket
$3800 +GST ($4370 inc)

Hitch Fitment Size
Pins: 50mm
Pin centres: 310mm
Ear Width: 220mm

Bucket width: 1570mm

If you are unsure what size your excavator pins are please check this chart which is typically a good indication as to what you might have (please note some models may vary slightly depending on the country they were ordered for.

https://diggercity.co.nz/pages/digger-hitch-size

#76

Excavator Trenching Spade
$650 +GST ($747.50 inc)

Hitch Fitment Size
Pins: 50mm
Pin centres: 360mm
Ear Width: 160mm

Trenching Spade Dimensions: 890mm Length, 280mm Wide

If you are unsure what size your excavator pins are please check this chart which is typically a good indication as to what you might have (please note some models may vary slightly depending on the country they were ordered for.

https://diggercity.co.nz/pages/digger-hitch-size

#66