NSB

zx27/30 tilt bucket 730mm wide- New NSB hydraulic single cylinder tilt bucket to suit most excavators with 40mm pin,185mm pin centre, 140mm ear width, replicable cutting edge.

(344031)

EXCAVATOR RIPPER ATTACHMENT SUIT 20 TON DIGGERS

New condition
Heavy duty construction
80mm pins
Replicable ripper tooth
Adjustable pin center from 450-480mm
Will fit most 20 ton machines with pin dimensions- 476mm center , 80mm pin, 305mm ear width

Case CX210B, CX225SR (80mm Pins, 451mm Centres, 306mm Arm Width)

Cat / Caterpillar 320, 325B 325C, (80mm Pins, 442-445 Centres, 310mm arm width which means hitch needs to be opened out 2.5mm each side on top)

Daewoo S180, S210W, S220, S225 (80mm Pins, 455-464mm Centres, 305mm Arm Width)

Doosan DX180, DX225 DX235 (80mm Pins, 464 Centres, 332mm arm width which means hitch needs to be opened out 14mm each side on top)

Hitachi EX200 EX210 EX225 (80mm Pins, 476mm Centres, 305mm Arm Width)

Hitachi ZX180, ZX200, ZX210, ZX225, (80mm Pins, 476mm Centres, 305mm Arm Width)

Hyundai R200, R210 R235 (80mm Pins, 460 Centres, 333mm arm width which means hitch needs to be opened out 13.5mm each side on top)

JCB JS220 (80mm Pins, 445 Centres, 305mm Arm Width)

Kobelco SK200, SK210, SK225, (80mm Pins, 444 Centres, 325mm arm width which means hitch needs to be opened out 10mm each side on top)

Komatsu PC200, PC220, PC228, PC240, PC270 (80mm Pins, 450-460mm Centres, 326mm arm width which means hitch needs to be opened out 10mm each side on top)

Volvo EC210 EC220, ECR235 (80mm Pins, 467mm Centres, 326mm arm width which means hitch needs to be opened out 10mm each side on top)

Sumitomo SH200, SH210, SH225, (80mm pins. 450-455mm Centres, 306mm arm width)

EXCAVATOR 30-35 TON RIPPER ATTACHMENT
NEW
100MM PINS
HEAVY DUTY CONSTRUCTION
REPLACABLE RIPPER TOOTH
SUIT MACHINES WITH 585MM PIN CENTRE, 100MM PIN , 418MM DIPPER WIDTH

Would suit these machines with above measurements : Hitachi ZX-330 ZX-350, EX350, ZX400 Komatsu PC300, PC350, PC400 Volvo EC330, EC340, EC360 Doosan DX300, DX340, DX350 Hyundai R290, R320, R360 Sumitomo SH300, SH330, SH350 ect.

We have sold many of these to many happy customers all over New Zealand. Once you have had a grab bucket you won't want to live without one!

Very solid build construction.


Grab Bucket

65mm Pins
254mm between ears
362mm Pin Centres

Would suit any of these machines pinned to the above specs:

Case CX130, CZ135, CX145 (65mm pins, 355mm centres, 254 arm width)

Daewoo 140 130
Doosan DX140 (65mm pins, 409mm centres, 260 arm width)

Hitachi EX100 EX110 EX120 EX130, EX135
Hitachi ZX110 ZX120 ZX130 ZX135 ZW140

Hyundai R110 R130 R140 (65mm pins, 390mm centres, 260 arm width)

Kobelco SK120 SK125, SK135, SK140, SK130 (65mm pins, 370-376mm centres, 250 arm width)

Sumitomo SH120, SH125, SH130, SH135, 65mm pins, 355mm centres, 254 arm width)


Check your machine pin size here
https://diggercity.co.nz/pages/digger-hitch-size

(350069)

.

EXCAVATOR GRAB BUCKET 18-23 TON

$9,500+gst ($10,925 incl gst)
Very solid build construction , replaceable teeth on bucket and thumb.

Grab Bucket and 3/4" wire armored hydraulic hoses ready to hook up to your excising aux piping.
Pin size-80mm
Pin centre- 470mm
Distance between the ears - 305mm


Would suit any of these machines pinned to the above pin specs:

Case CX210B, CX225SR (80mm Pins, 451mm Centres, 306mm Arm Width)

Cat / Caterpillar 320, 325B 325C, (80mm Pins, 442-445 Centres, 310mm arm width which means hitch needs to be opened out 2.5mm each side on top)

Daewoo S180, S210W, S220, S225 (80mm Pins, 455-464mm Centres, 305mm Arm Width)

Doosan DX180, DX225 DX235 (80mm Pins, 464 Centres, 332mm arm width which means hitch needs to be opened out 14mm each side on top)

Hitachi EX200 EX210 EX225 (80mm Pins, 476mm Centres, 305mm Arm Width)

Hitachi ZX180, ZX200, ZX210, ZX225, (80mm Pins, 476mm Centres, 305mm Arm Width)

Hyundai R200, R210 R235 (80mm Pins, 460 Centres, 333mm arm width which means hitch needs to be opened out 13.5mm each side on top)

JCB JS220 (80mm Pins, 445 Centres, 305mm Arm Width)

Kobelco SK200, SK210, SK225, (80mm Pins, 444 Centres, 325mm arm width which means hitch needs to be opened out 10mm each side on top)

Komatsu PC200, PC220, PC228, PC240, PC270 (80mm Pins, 450-460mm Centres, 326mm arm width which means hitch needs to be opened out 10mm each side on top)

Volvo EC210 EC220, ECR235 (80mm Pins, 467mm Centres, 326mm arm width which means hitch needs to be opened out 10mm each side on top)

Sumitomo SH200, SH210, SH225, (80mm pins. 450-455mm Centres, 306mm arm width)

(350090)

.

Note: Images are of a 10-14T unit (this is similar)

We have sold many of these to many happy customers all over New Zealand. Once you have had a grab bucket you won't want to live without one!

Very solid build construction.

Fitment size

45mm pins
170mm between Ears
230mm Pin Centre to Centre

Would suit any of these machines pinned to the above specs:
Hyundai R55
Komatsu PC40, PC45, PC50
Kobelco 45SR SK45, 50SR
Volvo EC55
Yanmar Vio45, Vio50, Vio55

Check your machine pin size here
https://www.guncity.com/diggerhitchsize

(350094)

.

If you want to see one in operation please call to arrange a time to view.

NOW $3,000+GST ($3,450 INCL GST)
WAS $3,912+GST ($4,499 INCL GST)

New NSB digger hydraulic log grab

Adjustable pin center
Suit 5-6 ton digger or similar
Pin size 45mm
Pin center adjustable from 230-280 MM
Dipper/ear width 160mm ( spacers bosses could be machined wider)

Would suit any of these machines pinned to the above specs:
Hyundai R55
Komatsu PC40, PC45, PC50
Kobelco 45SR SK45, 50SR
Volvo EC55
Yanmar Vio45, Vio50, Vio55

Hitachi EX/ZX 100/120/135 Manual Quick Hitch

Top quality NSB Hydraulic quick hitch for 10-14 tone excavator.

Built for the European market these hitches are well built.

Pinned for the standard Hitachi 9.5-14 ton machines.

Specs:
Make NSB
Model 9.5-14 ton Hitachi
65mm pin size,
255mm Arm width
360-410mm pin centres

You won’t find a better value for money quick hitch in NZ built to this quality.

If you want to see one in operation please call to arrange a time to view.

(Pic is of mixed models model but style is the same)

Would suit any of these machines pinned to the above specs:

Case CX130, CZ135, CX145 (65mm pins, 355mm centres, 254 arm width)

Daewoo 140 130
Doosan DX140 (65mm pins, 409mm centres, 260 arm width)

Hitachi EX100 EX110 EX120 EX130, EX135
Hitachi ZX110 ZX120 ZX130 ZX135 ZW140

Hyundai R110 R130 R140 (65mm pins, 390mm centres, 260 arm width)

Kobelco SK120 SK125, SK135, SK140, SK130 (65mm pins, 370-376mm centres, 250 arm width)

Sumitomo SH120, SH125, SH130, SH135, 65mm pins, 355mm centres, 254 arm width)


Check your machine pin size here
https://www.guncity.com/diggerhitchsize

(344012)

18-23 ton root rake 2200mm wide x 1230mm deep- New NSB root rake to suit excavators with fitment size

Pin size-80mm ,Pin centre- 470mm Distance between the ears - 305mm

(350071)

ZX120 12 ton rotating grab bucket

$13,912 +GST ($15,999 incl GST)

New hydraulic NSB rotating grab bucket complete with all piping, valving and fittings.

Will suit most 10-14ton excavators with 65mm pins

Once you have had a grab bucket you won't want to live without one!
This one has the added bonus of the rotate function.

Very solid build construction.

Pin size
65mm Pins
254mm between ears
362mm Pin centres

Bucket Width 530mm
Max Opening 1800mm
Oil Pressure 150-170 bar
Oil Cylinder Thrust 11.7-13.3 T
Operating Flow 90-110 L/M
Weight 730kg

Would suit any of these machines pinned to the above specs:

- Case CX130, CZ135, CX145 (65mm pins, 355mm centres, 254 arm width)
- Daewoo 140 130
- Doosan DX140 (65mm pins, 409mm centres, 260 arm width)
- Hitachi EX100 EX110 EX120 EX130, EX135
- Hitachi ZX110 ZX120 ZX130 ZX135 ZW140
- Hyundai R110 R130 R140 (65mm pins, 390mm centres, 260 arm width)
- Kobelco SK120 SK125, SK135, SK140, SK130 (65mm pins, 370-376mm centres, 250 arm width)
- Sumitomo SH120, SH125, SH130, SH135, 65mm pins, 355mm centres, 254 arm width)

Check your machine pin size here
https://diggercity.co.nz/pages/digger-hitch-size


Welcome to Digger City, we are machinery dealers located in Christchurch and have been selling new and used machinery since 2010. We pride ourselves on our service and our huge range of stock ready for immediate delivery nationwide.

Check out our listings to see our current stock of Excavators, Loaders, Bulldozers, Graders and earthmoving accessories.

Digger City also stocks popular machinery attachments; our experienced team can configure your new machine quickly at our onsite workshop.

Up to 100% finance can be arranged at competitive rates, call Joe on 0800 284 868, subject to normal lending criteria.

To visit the yard at 510 Cranford Street, Redwood, Christchurch or discuss your new machine, give Dan a call on 021 886 379

(344074)

zx40/50 tilt bucket 970mm wide- New NSB hydraulic single cylinder tilt bucket to suit most excavators with 45mm pin,230mm pin centre, 160mm ear width, replicable cutting edge.

(344030)

zx75 tilt bucket 1700mm wide- New NSB hydraulic single cylinder tilt bucket to suit most excavators with 50mm pin,310mm pin centre, 200mm ear width, replicable cutting edge.

(344004)