Yanmar

YANMAR CT-80 TRACTED TRACTOR LOW HOURS YANMAR CT-80 TRACTED TRACTOR LOW HOURS
YANMAR CT-80 TRACTED TRACTOR LOW HOURS

$34,500+GST ($39,675inc)


Yanmar CT-80 Tracked Tractor W/PTO & 3PT Linkage

80HP
Low 2655 Hours
Tracks in great condition
Full Cab
Fresh paint and decals
PTO
4 cyl diesel engine.
Vario speed gearbox.
3 point linkage.
Fresh Service
3.2 ton weight

Check out these things in the mud on youtube
https://www.youtube.com/watch?v=CiiCam1txtE
only 3.2PSI of ground pressure

$34,500 +GST
Yanmar Digger Key
Yanmar Digger Key

This key operates the following Yanmar plant:

Old Yanmar Excavators
New Yanmar Excavators

(344114)

$13 +GST
YANMAR SV100-1 10TON 2012 EXCAVATOR WITH 2,204HRS YANMAR SV100-1 10TON 2012 EXCAVATOR WITH 2,204HRS
YANMAR SV100-1 10TON 2012 EXCAVATOR WITH 2,204HRS

YANMAR SV100-1 EXCAVATOR 10 TON

$89,990+GST ($103,488INCL GST)

2012 model
2,204 hours
steel tracks with removable rubber pads
Factory ROPS cab
Blade
Will come with new Hyd quick hitch
New tilt bucket
Rock bucket in good condition
Aux piping
Paint touched up where needed

Due to arrive early Jan 10% deposit will hold untill arrival and inspected.
Would suit someone looking for any of these machines: Hitachi ZX50, ZX60, EX60, EX75, EX85, ZX70, ZX75 ZX85, Komatsu PC78, PC60, PC70, Yanmar Vio70, VIO75, VIO80, SV100

Specs
https://www.yanmar.com/global/construction/products/excavat
or/sv100/spec.html

For all inquiries contact Dan on 021886379

Viewing at Marshland Road, Christchurch.

$89,990 +GST
YANMAR SV100-1 10TON 2012 EXCAVATOR WITH 3390HRS YANMAR SV100-1 10TON 2012 EXCAVATOR WITH 3390HRS
YANMAR SV100-1 10TON 2012 EXCAVATOR WITH 3390HRS

YANMAR SV100-1 EXCAVATOR

$82,900+GST ($95,335 INCL GST)

2012 model
3390 hours
steel tracks with removable rubber pads
Factory ROPS cab
Blade
Will come with new Hyd quick hitch
New tilt bucket
Rock bucket in good condition
Aux piping
Paint touched up where needed

Due to arrive early Jan 10% deposit will hold untill arrival and inspected.
Would suit someone looking for any of these machines: Hitachi ZX50, ZX60, EX60, EX75, EX85, ZX70, ZX75 ZX85, Komatsu PC78, PC60, PC70, Yanmar Vio70, VIO75, VIO80, SV100

Specs
https://www.yanmar.com/global/construction/products/excavator/sv100/spec.html

$82,900 +GST
YANMAR SV100-1 10TON 2012 EXCAVATOR WITH 3571 HRS , BLADE YANMAR SV100-1 10TON 2012 EXCAVATOR WITH 3571 HRS , BLADE
YANMAR SV100-1 10TON 2012 EXCAVATOR WITH 3571 HRS , BLADE

ANMAR SV100-1 EXCAVATOR

$81,000+GST ($93,150 INCL GST)

2012 model
3571 hours
Steel tracks with removable rubber pads
Factory ROPS cab
Blade
Will come with new Hyd quick hitch
New tilt bucket
Rock bucket in good condition
Aux piping
Paint touched up where needed

Due to arrive early April 10% deposit will hold untill arrival and inspected.
Would suit someone looking for any of these machines: Hitachi ZX50, ZX60, EX70 , EX75, EX85, ZX70, ZX75 ZX85, Komatsu PC78, PC60, PC70, Yanmar Vio70, VIO75, VIO80, SV100

Specs
https://www.yanmar.com/global/construction/products/excavat
or/sv100/spec.html

$81,000 +GST
YANMAR SV100-1 10TON 2012 EXCAVATOR WITH 3684 HRS BLADE YANMAR SV100-1 10TON 2012 EXCAVATOR WITH 3684 HRS BLADE
YANMAR SV100-1 10TON 2012 EXCAVATOR WITH 3684 HRS BLADE

YANMAR SV100-1 EXCAVATOR

$81,100+GST ($93,150 INCL GST)

2012 model
3684 hours
steel tracks with removable rubber pads
Factory ROPS cab
Blade
Will come with new Hyd quick hitch
New tilt bucket
Rock bucket in good condition
Aux piping
Paint touched up where needed

Due to arrive early April 10% deposit will hold untill arrival and inspected.
Would suit someone looking for any of these machines: Hitachi ZX70 ZX80 EX60, EX75, EX85, ZX70, ZX75 ZX85, Komatsu PC78, PC60, PC70, Yanmar Vio70, VIO75, VIO80, SV100

Specs
https://www.yanmar.com/global/construction/products/excavat
or/sv100/spec.html

$81,000 +GST
YANMAR V3-6 3 TON WHEEL LOADER VERY LOW 262 HOURS FULL CAB YANMAR V3-6 3 TON WHEEL LOADER VERY LOW 262 HOURS FULL CAB
YANMAR V3-6 3 TON WHEEL LOADER VERY LOW 262 HOURS FULL CAB

YANMAR V3-6 WHEEL LOADER
$49,900+GST ( $57,385 INCL GST)

Very low 262 hours
Full cab
All tyres in exc condition
3 ton opperating weight
Factory ROPS cab

We have managed to sauce two more of these with simiular hours , please see other listings.
The v3 is no longer available new in New Zealand .
Due to arrive early October , 10% deposit will hold till arival and inspected.

YANMAR V3-6 FEATURES
2 Mode Control
Fully Automatic Mode- ?The machine will accelerate smoothly and change gear speed automatically
Fixed Speed Mode- ?Machine speed is fixed at low speed mode irrespective of accelerator operation. Powerful, smooth job operation-a convenient mode for jobs in restricted areas.

Auto Leveler or Return to Dig Function
A single lever operation places the bucket level on the ground, automatically. The bucket moves swiftly back to the scooping position after dumping. It makes everyone a skilled operator.

Large Counterweight
A large, sturdy counter-weight guards the rear. Damage to the rear is common in loader work. The rear, including turn signals, is securely protected by a large cast iron counter-weight. It is safe, sturdy and strong.

Rear Axle Oscillation
The driving force of the machine it transmitted securely in uneven terrain through the use of rear axle oscillation. It reduces operator fatigue and helps keep operation level.

Column Shift
A single lever operation for instant switching between forward and reverse. A safety lock prevents mis-operation.

Suspension Seat
Comfortable suspension seat with seatbelt and reclining back.



Flasher
Flasher and side combination work light.

V3-6 Quick Specs
Weight: 6801 lb
Net Power: 30.3 hp
Bucket Capacity: .52 cu yd

YANMAR V3-6 3TON  FULL CAB WHEEL LOADER WITH LOW 221 HOURS YANMAR V3-6 3TON  FULL CAB WHEEL LOADER WITH LOW 221 HOURS
YANMAR V3-6 3TON FULL CAB WHEEL LOADER WITH LOW 221 HOURS

YANMAR V3-6 WHEEL LOADER
$49,900+GST ( $57,385 INCL GST)

Very low 221 hours
Full cab
All tyres in exc condition
3 ton opperating weight
Factory ROPS cab

We have managed to sauce two more of these with simiular hours , please see other listings.
The v3 is no longer available new in New Zealand .

YANMAR V3-6 FEATURES
2 Mode Control
Fully Automatic Mode- 
The machine will accelerate smoothly and change gear speed automatically
Fixed Speed Mode- 
Machine speed is fixed at low speed mode irrespective of accelerator operation. Powerful, smooth job operation-a convenient mode for jobs in restricted areas.

Auto Leveler or Return to Dig Function
A single lever operation places the bucket level on the ground, automatically. The bucket moves swiftly back to the scooping position after dumping. It makes everyone a skilled operator.

Large Counterweight
A large, sturdy counter-weight guards the rear. Damage to the rear is common in loader work. The rear, including turn signals, is securely protected by a large cast iron counter-weight. It is safe, sturdy and strong.

Rear Axle Oscillation
The driving force of the machine it transmitted securely in uneven terrain through the use of rear axle oscillation. It reduces operator fatigue and helps keep operation level.

Column Shift
A single lever operation for instant switching between forward and reverse. A safety lock prevents mis-operation.

Suspension Seat
Comfortable suspension seat with seatbelt and reclining back.



Flasher
Flasher and side combination work light.

V3-6 Quick Specs
Weight: 6801 lb
Net Power: 30.3 hp
Bucket Capacity: .52 cu yd

YANMAR V4-5B 4 TON  WHEEL LOADER, CAB , LOW HOURS YANMAR V4-5B 4 TON  WHEEL LOADER, CAB , LOW HOURS
YANMAR V4-5B 4 TON WHEEL LOADER, CAB , LOW HOURS

YANMAR V4-5B WHEL LOADER

$49,990+GST ($57,488 INCL GST)

1001.8 HOURS
FULL CAB
TYRES IN GOOD CONDITION
Will have fresh service and fresh Yanmar yellow paint with new decals.

Pictured in Japan , due to arrive in Feb, 10% deposit will hold till arrival and inspection.

SPECS
https://www.yanmar.com/global/construction/products/wheel_loader/v4/spec.html

Would suit someone looking for a Hitachi LX60, LX30, LX40 LX50 or Komatsu WA30, WA40, WA50,Yanmar V4.Volvo,Cat,ect

$49,990 +GST
Yanmar VIO 17 2017 Excavator Yanmar VIO 17 2017 Excavator
Yanmar VIO 17 2017 Excavator

NEAR NEW CONDITION ONLY 154.8 HOURS

1.7 Ton YANMAR VIO17 Mini Digger

Specs

Manual Hitch
154.8 hours (LOW HOURS)
True zero tail swing
Off set boom
Rock Bucket and wide cleaning bucket
Front blade
Variable undercarriage with extension blade
Auxiliary piping
Rubber tracks
Cylinder guards
3 pump hydraulic system
4 pillar ROPS/FOPS canopy
Serviced from new by Yanmar agent

Clean and tidy machine ,runs and operates very nice.

Tandam transport trailer available an extra $4,347+GST.

Specs below
https://www.ritchiespecs.com/model/yanmar-vio17-mini-excavator

Would suit someone looking for any of these machines: EX15 , EX17, ZX15 ZX17,Komatsu PC17,Airman Ax17, ect



S467

YANMAR VIO 40-5 EXCAVATOR YANMAR VIO 40-5 EXCAVATOR
YANMAR VIO 40-5 EXCAVATOR

WAS $55,000+GST ($63,250 INCL GST)
NEW $43,350+GST ($49,853 INCL GST)


YANMAR VIO40-5 4.6 Ton Digger
Very rarely available for sale with low hours like this.


VI040-5
Front blade
Off set boom
Aux piping

Fresh paint and decals
Zero tail swing
Rock Bucket in good condition
Sprockets 80-85%
Track Chains 80%
Rubber Cleats

Fresh service
1771 hours
Full cab

Wide Bucket available at $2000+GST
Tilt bucket options available with machine purchase only from $3,000+gst

Zero tail swing makes it great in tight areas.

1970mm wide
2620mm High
See the brochure here (for size and reach specs)
https://diggercity.co.nz/pages/construction-excavator-brochures

Would suit someone looking for any of

Zero tail swing makes it great in tight areas.



SO#324

YANMAR VIO 40-5B 4 TON , RUBBER TRACKS YANMAR VIO 40-5B 4 TON , RUBBER TRACKS
YANMAR VIO 40-5B 4 TON , RUBBER TRACKS

YANMAR VIO40-5B
$34,000+GST ($39,100 INCL GST)

2008 MODEL
3028 HOURS
BLADE
RUBBER TRACKS
WILL HAVE FRESH SERVICE
WILL COME FRESHLY PAINTED IN YANMAR YELLOW WITH NEW DECALS
ROCK BUCKET
NEW MANUAL QUICK HITCH
PICTURED IN JAPAN DUE TO ARRIVE FEBUARY-10% DEPOSIT WILL HOLD TILL ARRIVAL AND INSPECTION.



Would suit someone looking for any of these machines: EX30, EX20, EX25 ZX30 ZX40 ,EX50 ZX50 Komatsu PC30, PC25 PC20 etc

$34,000 +GST

Scroll To Top